- 11 -
(Fig 10)
3. Pull the dust container away from the vacuum cleaner.
4. Hold the dust container low over your trash receptacle, to avoid dust falling onto your floors.
5. Then press the release button. When the release button is pressed, the bottom cover will open and the dust
will drop into your trash receptacle. (Fig 11)
(Fig 11)
n
HOW TO CLEAN AND REPLACE THE FILTER(s)
There are two filters in this unit, the intake filter & the exhaust filter. When the filters are dirty and the suction
power is reduced, you must clean or replace the filter(s).
Clean and replace Intake filter
1.
Open the top of the dirt container by grabbing the top handle with one hand and the tank bottom with the
other hand, and rotate the top counterclockwise. (Fig 12)
2. Pull the filter from the top of the chamber by simply lifting it up and out of the unit. (Fig 12)
3. Clean the filter using warm water, then allow the filter to air dry completely. Once the filter has completely air
dried, then assemble the filter back into the vacuum. Or, if the filter is too dirty or in an unusable condition,
replace the filter with a new one.
