18
Even with the cord plugged into the wall outlet and the power turned ON the
waxing/polishing/scrubbing nozzle will not start spinning until the handle has been released and angle
shown below is achieved. When user is at the step to plug cord into wall outlet always make sure unit
is in upright locked position.
With the waxing/polishing/scrubbing nozzle there are 2 cleaning states. Waxing/polishing/scrubbing
only and waxing/polishing/scrubbing PLUS vacuuming. When the ON/OFF switch is turned to the
first position it will only be waxing/polishing/scrubbing with no vacuum suction. When the ON/OFF
switch is turned to the second position it will be waxing/polishing/scrubbing AND vacuum suction
through the 2 suction holes as shown in the image below.
Next adjust the height of the handle wand to fit the user for waxing/polishing/scrubbing as shown
below. Lightly stepping on the waxing/polishing/scrubbing nozzle with the users foot may be helpful
when lengthening the wand.
