6
Specifications
Basic information
Intended use
Not permitted
Organisational measures and safety
Initial operation
Maintenance
Repairs
Regular inspections
Warranty
EC declaration of conformity
Specifications
600 215:
max. load capacity per wheel clamp [kg]:
500
(note the load-bearing capacity of the belt)
max. load capacity 4 wheel clamps [kg]:
2000
(note the load-bearing capacity of belts)
max. wheel size [inch]:
19
max. tyre width [mm]:
355
Material:
Galvanised
steel
Intrinsic weight without belt per wheel clamp [kg]:
11.6
Transport dimensions W x H x D [mm]:
230 x 410 x 370
Deployment temperature [°C]:
-25 to 60
Dekra tested.
600 245:
max. load capacity per wheel clamp [kg]:
875
(note the load-bearing capacity of the belt)
max. load capacity 4 wheel clamps [kg]:
3500
(note the load-bearing capacity of belts)
max. wheel size [inch]:
19
max. tyre width [mm]:
355
Material:
Galvanised
steel
Intrinsic weight without belt per wheel clamp [kg]:
11
Transport dimensions W x H x D [mm]:
230 x 410 x 370
Operating temperature [°C]:
-25 to 60
Dekra tested.
Basic information
Under Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery and amending
Directive 95/16/EC (new version), the ProLux Vario wheel clamp is a load-bearing device.
For the purposes of this standard, the Vario wheel clamp is a non-hoist component or piece of equipment which allows
the load to be gripped and which is attached between the machine and the load or to the load itself or which is intended to
become an integral part of the load in order to lift it.
It is essential that you read the original operating instructions completely and observe all notes and information carefully
before using the unit for the first time.
6
6
7
7
7
7
8
8
8
9
9
Original operating instruction – Vario wheel clamp 2000 kg / 3500 kg
English
English - Item no.: 600 215 / 600 245
Contents
