11
REV 7.5.0 / PL-INSTL-TREECOM-EN
PL-NC2000 connected to a group of Master PL-M2000 or PL-C1050
The communication network between any Master Controller and the PL-NC2000 can be connected wirelessly using the PL-TREE-COM.
(Figure 12)
1. The PL-TREE-COM connected to the PL-NC2000 via the RS-485 OUT port must be set as the "ROOT".
2. The PL-TREE-COM connected to individual PL-M2000, or PL-C1050 via the INT communication port must be set as the "LEAF".
3. All PL-TREE-COM modules must have their dipswitches set for the same channel number.
PL-C1050
PL-TREE-COM
LEAF
PL-M2000
PL-TREE-COM
LEAF
PL-NC2000
PL-TREE-COM
ROOT
PL-M2000
PL-TREE-COM
LEAF
Figure 12
