manualshive.com logo in svg

Prolon PL-C1000-VAV, Quick Start Manual

Share
Download
Prolon PL-C1000-VAV Quick Start Manual Download Page 8

REV 1.0  /   PL-QCK-WSENSOR/VC2000-EN

14

VAV Zone Controller 

(PL-C1000-VAV)

INT Port: Incoming Modbus RS485 communication from digital

sensor 

-OR-

 Remote computer with Prolon Focus software

Digital Input for night setback / Standby mode

Multi-function analog input

Common for all the inputs

Temperature setpoint (0-10K potentiometer)

Room temperature sensor (10K thermistor)

Output 5 (analog 0-10VDC) (Max Current: 40 mA)

Output 4 - Isolated or source, TRIAC 24 VAC

(max current: 300 mA)

Output 3 - Isolated or source, TRIAC 24 VAC

(max current: 300 mA)

Output 2 - Isolated or source, TRIAC 24 VAC

(max current: 300 mA)

Output 1 - Isolated or source, TRIAC 24 VAC

(max current: 300 mA)

Power source of the controller (24 VAC - Class 2)

NET Port: Incoming Modbus RS485 communication

- OR -

 BACnet MS/TP

32-122 °F (0-50 °C) Non-condensing

REV 1.0  /   PL-QCK-WSENSOR/VC2000-EN

15

INT Port: Incoming Modbus RS485 communication from digital

sensor 

-OR-

 Remote computer with Prolon Focus software

Digital Input for night setback / Standby mode

Multi-function analog input

Common for all the inputs

Temperature setpoint (0-10K potentiometer)

Room temperature sensor (10K thermistor)

Output 5 (analog 0-10VDC) (Max Current: 40 mA)

Output 4 - Isolated or source, TRIAC 24 VAC

(max current: 300 mA)

Output 3 - Isolated or source, TRIAC 24 VAC

(max current: 300 mA)

Output 2 - Isolated or source, TRIAC 24 VAC

(max current: 300 mA)

Output 1 - Isolated or source, TRIAC 24 VAC

(max current: 300 mA)

Power source of the controller (24 VAC - Class 2)

NET Port: Incoming Modbus RS485 communication

- OR -

 BACnet MS/TP

cULus Listed; UL 916 Energy Management Equipment, File E364757, Vol.1

Summary of Contents for PL-C1000-VAV











Reviews:

No comments

Brands by name

Popular brands

Load more brands