Beta Draft Confidential
2-36
Internet Managed Thermostat Configuration Guide, Release 1.0
Part No. 600-03001-550, Rev. 1
CHAPTER 2: Configuring the Thermostat Using the Web Interface
Use
Table 2-10
to configure the
Override Settings
fields.
Table 2-10 Advanced - Override Settings Field Descriptions
Field
Description
Hold
Allow Hold
Indicates if thermostat temperature setting are held independent
of schedule changes due to
Event
or
Daily Profiles
advancements.
Enabled
- Allow the temperature settings to be held for the
duration shown below.
Disabled
- Do not allow the temperature settings to be held.
Hold Mode Duration
Specifies the time interval in which the thermostat temperature
setting are held independent of schedule changes due to
Event
or
Daily Profile
advancements.
Perm
– The
Hold
period is indefinite and the temperature
setting are “held” until the user removes this condition.
1, 2, 3, 8, 12, 24
Hrs
–The amount of time in hours in which
the current temperature setting are “held” and inhibited from
change. The default interval is
3 Hrs
.
Note:
These durations are observed across
Event
boundaries.
General Occupancy Override Settings
Cool Setting
Displays the cool setpoint to be used while One Button Override
(OBO) is active.
40
°
F(4.5
°
C) to 110
°
F(43.5
°
C)
Heat Setting
Displays the current temperature programmed for the heating
system.
40
°
F(4.5
°
C) to 110
°
F(43.5
°
C)
Fan Schedule
Specifies the time in minutes of each hour of the
Event
in which
the fan will be
On
. The schedule begins on the hour and
advances for the duration specified. Note that within the hour of
each
Event
but outside the schedule interval, the fan behaves the
same as AUTO mode to ensure proper operation for either a
heating or cooling call to the HVAC system. Select one of the
following options:
Always Off
5 On / 15 Off
10 On / 10 Off
15 On / 5 Off
Always On
