25
APPLIANCE DESCRIPTION
Display
Display
Designation
Function
0
Zero
The heating zone is activated.
1…9
Power level
Selection of the cooking level.
E
Error message
Electronic failure.
H
Residual heat
The heating zone is hot.
A
Automated cooking device The boosted power is activated.
L
Locking
Control panel locking.
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
touches the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a “beep” sound.
For normal use, press only one key at a time.
USING THE HOB
Before first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. To avoid damaging the
hob surface, use only detergents specific for cleaning ceramic glass.
Starting-up
You should first switch on the hob, and then the desired heating zone.
•
Swich on/off the hob:
Control panel action
Signal
Press the key for a few seconds to switch on the hob.
4 x [ 0 ]
Press the key for a few seconds to switch off the hob.
Nothing or [ H ]
•
Start-up/ switch off a heating zone:
Control panel action
Signal
Once the hob has been switched on, press the selection key to
select the heating zone.
Display on
Press [ + ] to increase power.
[ 1 ] to [ 9 ]
Press [ - ] to decrease power.
[ 9 ] to [ 1 ]
Press [ - ] for a few seconds to stop the heating zone.
[ 0 ] or [ H ]
If no setting has been made within 20 seconds after switching on the hob, it turns off
automatically.
