Proline PMC56W-F Operating And Installation Instructions Download Page 37

Adjusting The Reduced Flame Position :

For reduced flame position the bypass screw must be loosened when converting from

LPG to NG. When converting from NG to LPG, the same screw must be tightend. Make

sure that the appliance is unpluged from the electric current and the gas feed is open.

Ignite the burners and leave them on in minimum position.

Remove the knobs because the screws are accesible only when the knobs are removed.

With the help of a small screwdriver tighten or loosen the bypass screw 90

0

, which makes

the flame of the burner come down to the minimum (Figure 6).

When the flame has a length of at least 4mm, the gas is well distributed. Make sure that

the flame does not die out when passing from the maximum position to the minimum

position.

10

Changing the Gas Inlet :

The  gas  feeding  pipe  which  conforms  to  the  regulations  on  effect  “A”  placed  on  pipe  sup-

port must be visible for all its length, it must be placed to avoid any contact with parts that will heat up.

It  is  recomended  to  always  place  a  joint  between  the  elbow  and  gas  supply  pipe.  Spain,

Italy,  Portugal,  Luxemburg,  Greece  and  Deutschland  autorize  the  connection  of  the  gas

hose  to  gas  connection  medium  as  it  is  shown  in  “B”.  For  these  countries,  the  shape  of

gas connection medium must conform to national rules and norms on effect.

For  Denmark,  Netherlands,  France,  Algeria,  Ireland  the  connection  is  obtained  by  using

the  pieces  “E”  and  flexible  hoses  as  seen  in  “C”  or  rigid  pipes.  This  type  of  connection

can  also  be  used  in  France,  Algeria,  Spain,  Italy,  Portugal,  Greece  and  Luxemburg.

For  the  United  Kingdom,  The  gas  connection  shall  be  carried  out  as  shown  in  “D”.

In  all  cases,  the  flexible  gas  supply  hose  can  neither  pass  behind  an  oven  nor  be

contact  with  combustible  meterials.  The  minimum  distance  between  the  appliance  and

adjacent surfaces must be 20mm.

After  the  connection  had  been  made,  it  has  to  be  tested.  This  test  can  be  done  by

applying  a  soapy  liquid  to  the  connection.  No  bubble  should  appear.  If  there  are  bubbles,

check the connection joint and remake it if necassary.

Summary of Contents for PMC56W-F

















































Reviews: