2. Grasp the handle on the filter assembly and pull it out of the container.
3. Empty the dirt container upside down over a trash can.
Health Tip:
If you suffer from allergies or asthma, take the dust container
outdoors to empty.
4. To separate the HEPA filter from the filter assembly, grasp the handle of the filter
assembly and then rotate the handle anticlockwise. Empty the filter cover.
5. Wash the filter, filter cover and the container under running water. Dry
thoroughly.
6. Replace the cleaned and dried HEPA filter into the filter cover
and then turn it clockwise until it locks in place
7. Replace the filter assembly into the container.
Make sure the filter assembly is firmly and properly
inserted into the container.
8. Replace the dust container to the handheld vacuum cleaner until
a click is heard.
Cleaning the brush
‐
roll
The brush must be cleaned regularly.
Make sure the appliance is switched off.
1. Detach the brush from the appliance.
2. Turn the brush upside down so that the brush
‐
roll is visible.
3. Press the brush
‐
roll release tab to open the brush
‐
roll cover.
Dust container release buttons
(on both sides)
Handle
EG-1
0
Downloaded from www.vandenborre.be
