ASSEMBLY FOR UPRIGHT VACUUMING
1. Swing the upright handle on the main vacuum cleaner
upwards by turning the handle release button until it
clicks into place in an upright position.
2. Attach the floor brush to the main vacuum cleaner
body, aligning the connectors on the neck of the floor
brush with the connector holes on the base of the main
vacuum cleaner body.
3. Fit the handheld vacuum cleaner in place on the main
vacuum cleaner body by first sliding the suction end
into place then pushing the handle into place until a
click is heard.
CHARGING THE APPLIANCE
1. Connect the power adapter to the socket on the hand
‐
held vacuum cleaner.
2. Plug the power adapter into the mains supply.
One blue light bar will flash, indicating the appliance is being charged.
3. The 4 blue light bars will illuminate when the appliance is fully charged.
USING THE APPLIANCE IN UPRIGHT MODE
Switch the appliance on by press
either on the handle or the handheld
vacuum cleaner.
The charging indicator
light is composed of 4 blue
light bars.
EG-
7
Downloaded from www.vandenborre.be
