SMARTBATPLUS
6
- 2 - INSTALLATION
2.1 MOUNTING
SMARTBATPLUS may be set up on a solid and even surface. The unit can also be mounted upside down to
a cross arm. For fixing, stable mounting clips are required. The mounting place must be of sufficient stabil-
ity and be able to support a weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the fixture’s being used.
IMPORTANT
Always additionally secure the projector with the safety rope from falling down. For this purpose, fasten
the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
Fig.4
THREADED HOLE
M12
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Switch on the SMARTBATPLUS with the power switch. The unit is ready for operation and can be operated
via a DMX controller or it independently performs its show program in succession.
After operation, switch off the unit with the power switch.
3.2 BASIC SETUP
The SMARTBATPLUS has a OLED display and 4 buttons for access to the functions of the control panel (fig.
5).
