17
RA2000PROFILE
between those.
• Press the ENTER button to confirm the selection and wait for the selected function to be restored.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
3.17 ADJUST
• This function allows you to change all parameters. Press the UP/DOWN buttons to select one of the
parameters and press ENTER to change the value (
000-999
) using the UP/DOWN buttons.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
3.18 INFORMATION ON THE DEVICE
• To view all the information on the device, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to select Information, then press the ENTER button to access the next
menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it.
-
Fixture Time
- Through the
Fixture Time
function, the operating time of the projector can be shown on
the display.
-
Temperature
- Through the
Temperature
function it is possible to display on the display the temperature
inside the moving head, where the lamp is located. The temperature can be displayed in degrees
Celsius or Fahrenheit.
-
Fans Speed
- Through the
Fans Speed
function it is possible to display on the display the fan speed pre-
sent near the lamp. The speed measurement is expressed in RPM (revolutions per minute).
-
Software Version
- Through the
Software Version
function, the version of the installed software can be
viewed on the display.
-
UID
- Select the
UID
function to display the identification ID for the RDM control.
• Press the LEFT button repeatedly to exit the menu.
3.19 DMX VIEW
Select the View DMX to visualize the DMX values received by the fixture for each channel during its opera-
tion.
NOTE: if the Motor fast mode is active, the speeds of all the engines increase to the maximum possible.
The RA2000PROFILE manages all the motors in a “smooth” mode by default, when the Motor fast mode is
activated the speeds increase to max and the smooth is lost.
