RA2000PROFILE
8
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program
to reset all motors to their home position. Shortly after that the RA2000PROFILE is ready for operation.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via light switch.
NOTE: remove the pan and tilt lock before connecting the RA2000PROFILE to the power supply.
3.2 BASIC
The control panel of RA2000PROFILE has a display and 5 buttons for the complete programming and
management of the projector menu (fig.4).
Fig.4 - Functions of the buttons and display icons
UP
DOWN
LEFT
RIGHT
ENTER
Increases the value
displayed or passes
to the previous item
in a menu
Decreases the value
displayed or passes
to the next item in
the menu
Return to the top
level
Commute from
units, tens, hundred
in the menu
Confirms the
displayed value,
or activates the
displayed function,
or enters the
successive menu