5
PROMOBEAM
3.1 Stand-Alone Operation
Enable stand-alone model: Pin 10 is ON: Pin 9 for motor direction & pins 1~8 for speed adjustable.
PROBLEM
PROBABLE CAUSE
SUGGESTED REMEDY
NO LIGHT
no power to the fixture check power connection
blown fuse
if power is applied but does not light, please check and replace the fuse if
necessary
burned out lamp
istall new lamp
fixture too hot
allow to cool down - improve air flow around the unit
3.2 Troubleshotting:
If the malfunction is not listed in the following form, contact qualified personnel only groped to solve the
problem.
- 3 - FUNCTIONS AND SETTINGS
