ProLights PIXIEWASHXB, User Manual

Page: 12 / 48

PIXIEWASHXB
10
3.4 DMX ADDRESSING
To set DMX addressing follow the instructions below:
• Press the button LEFT to enter the menu mode.
• Use the buttons UP/DOWN to select the
Connect item. Press the button RIGHT to confirm.
• Press the buttons UP/DOWN to select the DMX Address item. Then press the button RIGHT to confirm.
• Press the buttons UP/DOWN to select the desired value
001-512
; then press the button RIGHT to confirm.
• Press repeatedly the button LEFT to return the menu mode.
To able to operate the PIXIEWASHXB with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the PIXIEWASHXB. The other functions of the light effect panel are
then automatically assigned to the following addresses.
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
13 33 33-45 46 59 72
15 33 33-48 49 63 78
16 33 33-48 49 65 81
18 33 33-50 51 69 89
22 33 33-54 55 77 99
23 33 33-55 56 79 102
Fig.5 - Example 15 DMX channels configuration
. . . . . . . . . . . .
DMX512 Controller
DMX Address: 73 DMX Address: 48 DMX Address: 33 DMX Address: 63
Several units may be interconnected; follow the instructions below:
1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the
units. For longer cable runs we suggest a terminator at the last fixture (see page 16).