PIXIESPOT
18
• Press the button LEFT to enter the menu mode.
• Use the buttons UP/DOWN to select the
Test Setup
item. Press the button ENTER to confirm.
• Press the buttons UP/DOWN to select the
Auto Test
item.
• To confirm and start the automatic test press the ENTER button.
Manual Test
It allows to do adjustments on the effects through comands pannel to obtain a perfect balance between
the projectors.
• Press the button LEFT to enter the menu mode.
• Press the buttons UP/DOWN to select the item
Test Setup
. Then press the button ENTER.
• Press the buttons UP/DOWN to select the Manual Test item. Then press the button ENTER.
• Select the effect you want change (
Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed, Dimmer, Shutter, Red, Green, Blue, White,
Gobo, RGobo, Prism, Rprism, Focus)
.Then press the button ENTER to confirm
• Use the directional buttons to calibrate the effect setting a value between 0 - 255. Then press the but-
ton ENTER to confirm
• Press repeatedly the button LEFT to return the menu mode.
3.15 RESET FUNCTIONS
Auto reset
• Press the button LEFT to enter the menu mode.
• Press the buttons UP/DOWN to select the item
Reset Setup
. Then press the button ENTER.
• Press the buttons UP/DOWN to select the item
Auto reset
. Then press the button ENTER to confirm and
to restart automatically
Manual reset
• Press the button LEFT to enter the menu mode.
• Press the buttons UP/DOWN to select the item
Reset Setup
. Then press the button ENTER.
• Press the buttons UP/DOWN to select the item
Manual reset
. Then press the button ENTER to confirm.
• Press the buttons UP/DOWN to select the function you want reset between
Pan, Tilt, Gobo, Prism e Focus
. In
this way selecting
Yes
it is possible to start a preset program to restore the selected function.
• Then press the button ENTER to confirm, waiting the reactivation of the function.
3.16 FIXTURE INFORMATION
• Press the button LEFT to enter the menu mode.
• Press the buttons UP/DOWN to select the item
Information
. Then press the button ENTER.
• Press the buttons UP/DOWN to select the desired option item and press the button ENTER to confirm:
-
Fixture Time
- Through the
Fixture Time
function you can display the operating time of the projector.
-
Software Version
- Select
Software Version
, press ENTER button to confirm, firmware version will show on
the display.
-
Temperature -
Through the function
Temperature
can be displayed on the display the temperature of
the device in ° C.
• Press repeatedly the button LEFT to return the menu mode.
