ProLights MULTIFLOWER 102, User Manual

Page: 19 / 32

5
MULTIFLOWER 102
- 2 - INSTALLATION
2.1 Mounting
MULTIFLOWER102 can be fixed (as shown below) using the mounting bracket screws or using the dedicated
lighting support if mounted on a crossbeam. To align the light effect unit, release the locking screws (2); ad-
just the desired inclination of the unit, then retighten the screws. The mounting place must be of sufficient
stability and be able to support a weight of 10 times of the unit’s weight.
Inoltre, assicurarsi di rispettare tutte le avvertenza, in materia di sicurezza:
• Always additionally secure the projector with the safety rope from falling down. For this purpose, fasten
the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
• Install the projector at a suitable location by means of the mounting bracket (1).
• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the
bracket if is necessary.
Fig.4
1
2