LUMipAR12HpRO
6
- 2 - INSTALLATION
2.1 MOUNTING
LUMIPAR12HPRO may be set up on a solid and even surface. The unit can also be mounted upside down
to a cross arm. For
fi
xing, stable mounting clips are required. The mounting place must be of su
ffi
cient
stability and be able to support a weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the
fi
xture’s being used.
t
Install the projector at a suitable location by means of the mounting bracket (1).
t
Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
t
Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the
bracket if is necessary.
Fig.2
1
2
Summary of Contents for LUMIPAR12HPRO
Page 1: ...MANUALE UTENTE USER MANUAL LUMIPAR12HPRO IT EN SUpER SLiM pARLED...
Page 21: ......
Page 43: ......
