GB
LDID180
www.prolights.it
7
Operation without DMX controller
When there is no DMX control signal at the jack DMX INPUT (8), the yellow LED MASTER (10) will light up, the
display (16) will show the function adjusted and the unit will automatically operate according to the show
programme selected. For this purpose, the blackout function must be deactivated.
Adjusting the number of DMX channels
To be able to operate the light effect panel with a light controller, the DMX start address and the number
of DMX channels must be adjusted. The number of DMX channels depends on the functions required and
possibly also on the number of the control channels available.
1. Press button MENU (11) so many times until the display (16) shows channel mode. Make sure that the
next button is pressed within 8 seconds, otherwise the adjusting process will end.
2. Press button ENTER (13). the number of DMX channels is shown in a flashing way.
3. Use button DOWN or UP (12) to adjust the number of DMX channels and memorize it with button ENTER.
Channel mode reappears on the display. After 8 seconds the light effect panel returns to the previous
function mode.
Adjusting the start address
To be able to operate the light effect panel with a light controller, adjust the DMX start address for the first
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the LDID180. The other functions of the light effect panel are then
automatically assigned to the following addresses. An example with the start address 33 is shown below:
BLACK OUT
To balckout all the fixture
FUNCTION
Stobe
1. Synchronous strobe in white
color.
2. Synchronous strobe in rainbow.
3. Synchronous sound in white.
4. Synchronous sound in rainbow.
9 Select
10. Red
11. Green
12. Orange
13. Purple
14. Yellow
15. Cyan
16. Magenta
17. Blue
18. White
Select 11 show modes
1. Show 0.
2. Show 1.
3. Show 2.
4. Show 3.
5. Show 4.
6. Show 5.
7. Show 6.
8. Show 7.
9. Show 8.
10. Show 9.
11. Auto fade.
Setting speed
4. Slow speed.
5. Middle speed.
6. Fast speed.
MODE
Sound (LED OFF)
Latch (LED on)
Chase (LED blink)
Speed (LED fast blink)
» FUNCTIONS AND SETTINGS
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
6
33
33-38
39
45
51
9
33
33-41
42
51
60
15
33
33-47
48
63
78
24
33
33-56
57
81
105
27
33
33-59
60
87
114
Summary of Contents for LDID 180
