ProLights Halurock, User Manual

Page: 34 / 56

hALURoCK
8
- 2 - INSTALLATION
2.1 MOUNTING
The HALUROCK may be set up on a solid and even surface. By means of the fixing facilities of the base-
plate, the unit can also be mounted upside down to a cross arm (fig.3). For fixing, stable mounting clips
are required. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating.
The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s
weight. When carrying out any installation, always comply scrupulously with all the regulations (particu-
larly regarding safety) currently in force in the country in which the fixture’s being used.
Always additionally secure the projector with the safety rope from falling down. For this purpose, fasten
the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
Fig.3
CLAMP
SAFETY
CABLE
OMEGA
BRACKETS