21
FURY FY700S
3.13 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Setting functions
•
Press the MODE/ESC button to enter the main menu and scroll using UP/DOWN button to select
the desired function, then press ENTER button.
•
Press ENTER button to confirm the choice.
-
[PAN REVERSE]
- Reverse PAN movement. Select (
NORMAL/ REVERSE
) for normal/inverted control of
the PAN function.
-
[TILT REVERSE]
- Reverse TILT movement. Select (
NORM/ REVERSE
) for normal/inverted control of the
TILT function.
-
[DISPLAY]
- Time for display backlight. Select (
BRIGHT - 30 CLOSE
) for length of time for diplay
backlight. In the "30 CLOSE" mode the background lighting will turn off after 30 seconds id no
buttons are pushed.
-
[PAN ANGLE]
- Restrict the pan angles. Select either
[540]
,
[360]
or
[180]
. (For built-in program only)
-
[TILT ANGLE]
- Restrict the tilt angles. Select either
[270]
,
[180]
or
[90]
. (For built-in program only)
-
[TEMP. DISP]
- Independent temperature of each LED (T1, T2, T3).
-
[RESET SYSTEM]
- Whole machine reset. Select
[OK]
or
[NO]
(no Reset).
-
[LOAD SET]
- Load original state. Select
[OK]
or
[NO]
(unload).
•
Press the MENU button to go back or wait some seconds for automatic exit from the menu.
Setting service functions
The FURY FY700S contains a password-protected mode which allows you to calibrate and trouble-
shoot any small issues you may have during normal operation. In order to access this mode, do the
following:
•
Press and hold the button MODE/ESC for at least 10 seconds.
•
Use the UP/DOWN buttons to enter the password:
[2323]
. Press ENTER to confirm the access.
NOTE - Press the button DOWN to navigate the digit. Press the button UP to navigate the value.
In this mode you have several options for adjustment.
•
Press UP/DOWN button to select
PAN INIT, TILT INIT, COLOR INIT, GOBO1 INIT, GROTA INIT, GOBO2 INIT, FOCUS INIT,
PRISMA INIT, IRIS INIT, LAMP INIT
.
•
Press ENTER button to confirm the choice.
•
Use the UP/DOWN button to select the desired value (
000-255
).
•
Press ENTER button to confirm the setting.
In order to access this mode, do the following:
•
Press and hold the button MODE/ESC for at least 10 seconds.
•
Use the UP/DOWN buttons to enter the password:
[2322]
. Press ENTER to confirm the access.
NOTE - Press the button DOWN to navigate the digit. Press the button UP to navigate the value.
•
Press UP/DOWN button to select
PRISM HALF e FOCUS HALF
.
•
Press ENTER button to confirm the choice.
•
Use the UP/DOWN button to select the desired value (
000-255
).
•
Press ENTER button to confirm the setting.
Summary of Contents for Fury FY700S
Page 1: ...EN IT Manuale Utente User Manual FURY FY700S HIGH POWER LED MOVING SPOT ...
Page 27: ......
Page 28: ......
Page 55: ......
