ProLights Fury FY700S, User Manual

Page: 36 / 56

FURY FY700S
8
- 2 - INSTALLATION
2.1 MOUNTING
The FURY FY700S may be set up on a solid and even surface. By means of the fixing facilities of the base-
plate, the unit can also be mounted upside down to a cross arm.
The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s
weight. Always additionally secure the projector with the safety rope from falling down.
For this purpose, fasten the safety rope at a suitable position so that the maximum fall of the projector
will be 20 cm.
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their start position. Shortly after that the FURY FY700S is ready for operation.
To switch off, disconnect the mains plug from the socket.
3.2 BASIC
The FY700S has a LCD display and 4 button used to access the control panel functions and manage them
(fig.4).
Fig.4
MODE ESC UP DOWN ENTER
Used to access the menu or
to return a previous menu
option Navigates downwards
through the menu list and
increases the numeric value
when in a function Navigates upwards through
the menu list and decreases
the numeric value when in a
function Used to select and store the
current menu or confirm the
current function value or
option within a menu