ProLights FURY FY250S, User Manual

Page: 43 / 52

19
FURY FY250S
3.13 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Setting functions
• Press the MODE/ESC button to select the function, scroll using UP/DOWN button to select the
desired function, then press ENTER button.
• Press ENTER button to confirm the choice.
- [PAn] - Reverse PAN movement. Select ( PAn/rPAn ) for normal/inverted control of the PAN function.
- [tit] - Reverse TILT movement. Select ( tit/rtit ) for normal/inverted control of the TILT function.
- [diS] - Change the LCD display text position. Select ( diS/rdiS ) for normal/change text position.
-
[PA54]
- Restrict the pan angles. Select either
[540°- PA54]
,
[360°- PA36]
or
[180°-PA18]
. (For built-in
program only)
- [Ti27] - Restrict the tilt angles. Select either [270°- ti27] , [180°- ti18] or [90°- ti9] . (For built-in program
only)
- [rESt] - Whole machine reset. Press ENTER to enable this function.
-
[LoAd]
- Load original state. Press ENTER to enable this function.
• Press the MODE/ESC button to go back or wait some seconds for automatic exit from the menu.
Setting service functions
The FURY FY250S contains a password-protected mode which allows you to calibrate and trouble-
shoot any small issues you may have during normal operation. In order to access this mode, do the
following:
• Press and hold the button MODE/ESC for at least 10 seconds.
• Use the UP/DOWN buttons to enter the password: [2323] . Press ENTER to confirm the access.
NOTE - Press the button DOWN to navigate the digit. Press the button UP to navigate the value.
In this mode you have several options for adjustment.
• Press UP/DOWN button to select P128, t128, G128, C128, L128, d000, P --0, t --0
• Press ENTER button to confirm the choice.
• Use the UP/DOWN button to select the desired value ( 000-255 ).
• Press ENTER button to confirm the setting.
In order to access this mode, do the following:
• Press and hold the button MODE/ESC for at least 10 seconds.
• Use the UP/DOWN buttons to enter the password: [2322] . Press ENTER to confirm the access.
NOTE - Press the button DOWN to navigate the digit. Press the button UP to navigate the value.
• Select the function
L000
.
• Press ENTER button to confirm the choice.
• Use the UP/DOWN button to select the desired value ( 000-255 ).
• Press ENTER button to confirm the setting.