ProLights FURY FY250S, User Manual

Page: 34 / 52

FURY FY250S
10
MAIN FUNCTION SELECTION DESCRIPTION
Pan Adjust P128 Manually adjust the pan angle
Tilt Adjust t128 Manually adjust the tilt angle
Gobo wheel adjust G128 Manually adjust the gobo wheel
Color wheel adjust C128 Manually adjust the color wheel
Prism Adjust L128 Manually adjust the prism
Lamp brightness Adjust d000 Manually adjust the starting brightness of the lamp
Pan switch Strength P - - 0 Adjust the strength of pan switch
Tilt switch Strength t - - 0 Adjust the strength of tilt switch
MAIN FUNCTION SELECTION DESCRIPTION
Prism motor adjust L000 Adjustment for half a step for the motor of prism
The FURY FY250S contains a password-protected mode which allows you to calibrate and troubleshoot
any small issues you may have during normal operation. In order to access this mode, do the following:
• Press and hold the button MODE/ESC for at least 10 seconds.
• Use the UP/DOWN buttons to enter the password: [2323] . Press ENTER to confirm the access.
NOTE - Press the button DOWN to navigate the digit. Press the button UP to navigate the value.
In order to access this mode, do the following:
• Press and hold the button MODE/ESC for at least 10 seconds.
• Use the UP/DOWN buttons to enter the password:
[2322]
. Press ENTER to confirm the access.
NOTE - Press the button DOWN to navigate the digit. Press the button UP to navigate the value.
After entering into the interface above, pressing the MODE/ESC button can be back to the present running
state or if no operating within 60 seconds it will exit automatically.