13
EXPLO3000D
Chase Speed
Chase speed is controlled from slow to fast with the SPEED fader.
The BLACK OUT button toggles chase run on and off. The indicator diode is on when chase stopped and
off when chase running.
Chase Number
Toggle Chase number with Chase button and will be shown on the nixie tube.
Chase Mode
Toggle Chase running way with MODE button: AUTO/SOUND mode. The corresponding LED indicator will
display the selected mode.
Blind Effect
The blinder effect is controlled with the FULL ON button. The intensity is the maximum Intensity. Lamp
power is electronically regulated to prevent the lamp from overheating.
Single Flash
Single flashes can be achieved by pressing the SINGLE FLASH button. Switch on the “BLACK OUT” and
indicator lamp light up, to press the SINGLE FLASH button for triggering a single flash effect.
3. 9 TEST FUNCTION
Start operating TEST function when set pin 3 of the Mode DIP switch to ON. No matter if EXPLO3000D has
DMX512 signal input from controller, it will automatically test the light intensity/speed and blind effect
of the lamp.
Summary of Contents for EXPLO3000D
Page 1: ...EN IT Manuale Utente User Manual EXPLO3000D DMX STROBE...
Page 17: ......
Page 35: ......
