PROLIGHTS - EclProfile
FW IPVW
34
ROTATING GOBO ASSEMBLY (CODE ECLPRIPROTGOBO1 - OPTIONAL)
1
C
C
D
B
A
DETAIL
To insert a gobo into the marked rotating gobo assembly, remove the spring (A) and insert the new
gobo (B) following the procedure shown in the image (DETAIL).
Loosen the marked screws (C). Then open the slot of the middle part (D).
2
A
B
C
Insert the soft edge filter into the slot. The flaps (A) will go into the appropriate size. Then connect the
rotating gobo assembly throught the connector (C) into the socket.
NOTE: To remove the accessory, reverse the procedure.
Fig. 16
