ProLights EclPanel TWCJR, User Manual

Page: 4 / 36

PROLIGHTS - Ecl
PanelTWCJR 2
SAFETY INFORMATION
WARNING!
• Please read carefully the instruction reported in this section before installing, power-
ing, operating or servicing the product and observe the indications also for its future
handling.
This unit is not for household use, only professional applications.
Installation
• This product is designed for indoor and dry environments.
•
Do not use in wet location and do not expose the fixture to rain or moisture.
• Never use the fixture in places subject to vibrations or bumps.
• Make certain that no inflammable liquids, water or metal objects enter the fixture.
• Excessive dust, smoke fluid, and particle build up degrades performance, causes
overheating and will damage the fixture. Damage caused by inadequate cleaning or
maintenance is not covered by the product warranty.
0,5 m
Minimum distance of illuminated objects
• The projector needs to be positioned so that the objects hit by the beam of light are
at least 0.5 meters (1.64 ft) from the lens of the projector.
T 45°C
a
Max operating ambient temperature (Ta)
• Do not operate the fixture if the ambient temperature (Ta) exceeds 45 °C (113 °F).
T -20°C
a
Minimum operating ambient temperature (Ta)
• Do not operate the fixture if the ambient temperature (Ta) is below -20 °C (-4 °F).
Protection from burns and fire
• The exterior of the fixture becomes hot during use. Avoid contact by persons and
materials.
• Ensure that there is free and unobstructed airflow around the fixture.
• Keep flammable materials well away from the fixture
• Do not expose the front glass to sunlight or any other strong light source from any an-
gle. Lenses can focus the sun’s rays inside the fixture, creating a potential fire hazard.
• Do not attempt to bypass thermostatic switches or fuses.
Indoor use
• This product is designed for indoor and dry environments.
•
Do not use in wet location and do not expose the fixture to rain or moisture.
• Never use the fixture in places subject to vibrations or bumps.
• Make certain that no inflammable liquids, water or metal objects enter the fixture.
• Excessive dust, smoke fluid, and particle build up degrades performance, causes
overheating and will damage the fixture. Damage caused by inadequate cleaning or
maintenance is not covered by the product warranty.
T 50°C
c
Temperature of the external surface
• The surface of the fixture can reach up to 50 °C (122 °F) during operation. Avoid
contact with people and materials.