ProLights ECLJRG2, User Manual

Page: 11 / 32

9 ECLJRG2
3.7 DMX MODE
• Press the button MENU so many times until the display shows 1CH / 3CH , and press the button ENTER to
confirm.
• Press UP/DOWN button to select the desired value ( 001-512 ). Press and hold to scroll quickly.
• Press ENTER button to store.
To able to operate the ECLJRG2 with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the ECLJRG2. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
1 33 33 34 35 36
3 33 33-35 36 39 42
DMX Address: 42 DMX Address: 36 DMX Address: 33 DMX Address: 39
Fig.5 - Example 3 DMX channels configuration
DMX512 Controller
. . . . . . . . . . . .