15
ECLFRJPTU - DY
and press the ENTER button to display it.
-
Fixture Time
- Through the
Fixture Time
function you can display the operating time of the projector.
-
Software Version
- Through
Version
function you can display the currently installed software version.
-
UID
- This option shows the RDM identification number.
• Press the MENU button repeatedly to exit the menu and to save the changes made.
3.12 MASTER SLAVE
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Stand Alone
icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Master/Slave
and press ENTER to confirm
your choice.
• Press the UP/DOWN button to select the mode of operation:
-
Master
, if the unit is connected in series with other units and it acts as the Master;
-
Slave
, if the unit is not connected to other units.
• Press the ENTER button to confirm your choice.
• Press the MENU button repeatedly to exit the menu and to save the changes made.
3.13 EFFECTS
The unit has pre-programmed effects that can be set through the following procedure:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Effects
icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to select the mode of operation:
Effects 1
,
Effects 2
,
Effects 3
,
Effects 4.
• Press the ENTER button to confirm your choice.
• Press the MENU button repeatedly to exit the menu and to save the changes made.
3.14 STATIC
• The unit allows you to create configurations that can be set through the following procedure:
• To enter to static static mode, Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Stand Alone
icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Static
and press ENTER to confirm your
choice.
• Throught the UP/DOWN buttons select
DIMMER
o
STROBE
and press the ENTER button to confirm the
desired function.
• Set the value (000 - 255), Throught the UP/DOWN buttons, then press the ENTER button to confirm
• Press the MENU button repeatedly to exit the menu and to save the changes made.
Summary of Contents for ECLFRJPTU-DY
Page 1: ...USER MANUAL MANUALE UTENTE ECLFRJPTU DY EN IT POLE OPERATED FRESNEL PROJECTOR...
Page 42: ......
Page 43: ......
