ProLights ECLFRJPTU-DY, User Manual

Page: 13 / 44

11 ECLFRJPTU - DY
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
To turn on the ECLFRJPTU-DY connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then
the unit is ready for operation. You can also adjust the dimmer and zoom using the knobs.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via a light switch.
NOTE - To operate the projector ECLFRJPTU-DY you need a system track. The track system must be in-
stalled and maintained by a suitably qualified person in compliance with latest construction and relevant
legislation. It is the responsibility of the installer to ensure the electrical, mechanical and thermal com-
patibility of the track system and the fittings. The connection to the main network of electric distribution
must be carried out by a qualified electrical installer.
ATTENTION - Mains voltage must be switched off before mounting; maintenance; insert and replace
Adaptors; spots and luminaires.
3.2 BASIC
Access control panel functions using the knob located directly underneath the LED Display (fig.8).
Fig.8- Functions of the buttons
Knob
Used to access the menu, to return a previous
menu option, to navigate through the menu,
to select and store the current menu or confirm
the current function value or option within a
menu