ProLights EclExpo Flood300VW, User Manual

Page: 19 / 28

Keys Mode Description
MENU + ENTER then power on Clear All Clear all value of fun factory defaul
UP + DOWN after power on Flip Display Directly flip display without enter inside menu
ERRROR SHOWED POSSIBLE CAUSES
[LED TEMPERATURE SENSOR ERROR] LED temperture sensor damaged (open or in short circuit)
[TEMPERATURE TOO HIGH]
This error message indicates that an overheating has occurred and the led has been
switched OFF by the product protection system.
[MAINTENANCE TIME] Need to be done standard maintenance and also reset of elapsed time
[DMX ACTIVE] Transfer configuration is used with dmx signal connected
11 - SHORTCUTS
12 - ERRORS
Parameter PID GET SET Values Description
Default
Value
DMX Fault 0x82DD x x 0-2
0: Blackout
1: Hold
2: Standalone Mode
0
Master/Slave 0x8211 x x 0-2
0: Master DMX
1: Master No DMX
2: Slave
0
Standalone Mode 0x82EC x x 0-3
0: Static
1: CCT preset
2: Manual WW/CW
3: FX
1
Static Colors 0x82BE x x 0-2
0: Full WW
1: Full CW
2: Full WW+CW
1
White Presets 0x82BF x x 0-9
0: 2700K
1: 2800K
2: 3200K
3: 3500K
4: 4000K
5: 4500K
6: 5000K
7: 5600K
8: 6000K
9: 6500K
4
Manual WW 0x82E2 x x 0 - 255
Set level of WW in Manual WW/
CW mode
255
Manual CW 0x82E3 x x 0 - 255
Set level of CW in Manual WW/
CW mode
255
FX Selector x x 0 - 3 Choose FX 1 - 4 0
FX Speed x x 0 - 100 Set speed of FXs 100
Fan Mode 0x82D2 x x 0 - 3
0: Auto
1: High
2: Silent
3: Off
0
Output Control 0x830C x x 0 - 1
0: Dynamic
1: Constant
0
White Calibration - WW 0x82C6 x x 125 - 255 Calibrate level of WW ---
White Calibration - CW 0x82C7 x x 125 - 255 Calibrate level of CW ---
Fixture Hours 0x82C5 x 0 - 65535 Show Fixture Hours ---
Power Consumption (AC 220V) 0x82DE x Show Power Consumption (W) ---
Maintenance Period (Alert) 0x82DF x 0 - 300 300
Maintenance Period (Time and Reset) 0x82E0 x x 0 - 300 ---
Error Messages 0x82E0 x ---
Clean All Data 0x82C8 x x 0 - 1 0: No 1: Yes 0
PROLIGHTS - EclExpo
Flood300VW 17