ProLights Diamond 193, User Manual

Page: 31 / 40

11
DIAMOND193
DISPLAY STAND ALONE MODE LASER EFFECT
Aut
AUTOMATIC SHOW with GVC colors
Au1
AUTOMATIC SHOW with single VIOLET color
Au2
AUTOMATIC SHOW with single GREEN color
Au3
AUTOMATIC SHOW with single CYAN color
Sou
SOUND ACTIVATED SHOW with GVC colors
So1
SOUND ACTIVATED SHOW with VIOLET color
So2
SOUND ACTIVATED SHOW with GREEN color
So3
SOUND ACTIVATED SHOW with CYAN color
3.5 Sound Mode sensitivity setting
Where the function is described as a “Sound activated” function, the movements of the laser beam are
music-controlled via the microphone.
For music control adjust the control SENSITIVITY for the microphone sensitivity so that the dynamic power
of the music will be reproduced in an optimum way by the movements of the laser. When changing the
pattern or the movement by a music signal, the LED (3) shortly lights up.
• Press the FUNC button so many times until the display shows [ S 6 ] (fig.6).
• Press UP and DOWN button to set microphone sensitivity. [ S 0 ] is no sound activated, from [ S 9 ], the
sensitivity level is going more sensitive.
• Press ENTER button to confirm and save the setting.
NOTE: when changing the volume of the music system, the microphone sensitivity must be adapted ac-
cordingly via the control.
Fig.6
FUNC UP DOWN ENTER