ProLights Diamond 193, User Manual

Page: 30 / 40

10
DIAMOND193
3.3 Menu structure
3.4 Operation in Stand Alone mode
In this mode, the unit is set as Master. In this operation mode the unit independently runs through its show
program:
• Press the FUNC button so many times until the display shows [ Aut ] (fig.5), and press ENTER button to
confirm the selection.
• Press FUNC button again to enter mode option. In the mode option setting, the stand alone laser show
that you are going to choose is flashing. Press UP or DOWN to change stand alone laser show, you will
have 8 different stand alone preprogrammed laser show. Their display and effect are listed below
• To confirm, press the button ENTER.
The laser is working in stand alone. Each time when you turn on your laser, you will have this confirmed
laser show.
Fig.5
FUNC UP DOWN ENTER
FUNC
Aut ENTER
UP
DOWN
FUNC
ENTER
Aut
Au1
Au2
Au3
Sou
So1
So2
So3
ENTER 001-511
UP
DOWN
ENTER SLA
ENTER tSt
UP
DOWN
ENTER
S S
S 0
S 1
S 9
..
.