ProLights DERBY XXL, User Manual

Page: 16 / 28

DERBYXXL
4
1.2 Description and technical specifications
DERBYXXL is a lighting effect based on RGBWA LED technology, creating multicoloured dynamic beams
with reproduction of overlapping shapes and rings.
• Light source: 5x3W RGBWA LEDs (1 red, 1 green, 1 blue, 1 white, 1 amber)
• Coverage angle: 160°
• Colour mixing: RGBWA for a limitless chromatic range
• Effect type: multicoloured dynamic beams with reproduction of overlapping shapes and rings
• LED average life span: >50’000 hours
• Control panel and user interface through 4 char LED display
• Auto mode: 14 built-in programs selectable from display, execution speed and strobe adjustment
• DMX mode: 2 DMX modes available, 4 and 5 channels for remote controlling of auto shows, Sound mode
activation and colours selection
• Master/Slave mode: for synchronized operation of more units linked in a chain
• Sound mode: sound activation through built-in microphone (Soft and Rock mode) with sensitivity ad-
justment
• Static colour mode: selection of static colours
• Connections: XLR-3p (signal), VDE socket (power)
• Hanging system: adjustable aluminium bracket
• Power supply: AC 100/240V, 50/60Hz
• Power consumption: 40W
• Weight: 3,7kg
• Dimensions (WxHxD): 330x220x245mm
- 2 - INSTALLATION
2.1 Mounting
DERBYXXL can be fixed (as shown below) using the mounting bracket screws or using the dedicated light-
ing support if mounted on a crossbeam. To align the light effect unit, release the locking screws (fig.2); ad-
just the desired inclination of the unit, then retighten the screws. The mounting place must be of sufficient
stability and be able to support a weight of 10 times of the unit’s weight.
• Install the projector at a suitable location by means of the mounting bracket (1).
• Always additionally secure the projector with the safety rope from falling down. For this purpose, fasten
the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the
bracket if is necessary.
Fig.2
1
2