15
CROMOSPOT400
3.12 CONSTRUCTION OF THE DMX TERMINATION
The termination avoids the risk of DMX 512 signals being reflected back along the cable when they reach-
es the end of the line: under certain conditions and with certain cable lengths, this could cause them to
cancel the original signals.
The termination is prepared by soldering a 120Ω 1/4 W resistor between pins 2 and 3 of the 5-pin male XLR
connector, as shown in figure.
Example:
3 pin XLR connector
Fig.6
Summary of Contents for CROMOSPOT400
Page 1: ...EN IT Manuale Utente User Manual CROMOSPOT400 MOVING HEAD...
Page 29: ......
Page 59: ......
