13
CROMOSPOT400
3.7 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.8 DMX CONFIGURATION
CROMOSPOT400 is equipped with different DMX configuration.
• Press the button MENU so many times until shows
[PERSON]
, and press the button ENTER to confirm.
• Select the desired DMX configuration (
PERSON1 - PERSON2
) through the button UP/DOWN.
• Press the ENTER button to confirm.
• Press the MENU button to go back or wait some seconds for automatic exit from the menu.
The tables on page 16 indicate the operating mode and DMX value. The CROMOSPOT400 is equipped with
3/5-pole XLR connections.
3.9 DMX MODE
• Press the button MENU so many times until the display shows
[RUNMODE]
, and press the button ENTER
to confirm.
• Select in submenu
[RUN]
, press ENTER button to confirm the choice.
• Press UP/DOWN button to select
[DMX512]
.
• Press the button ENTER to store.
3.10 DMX ADDRESSING
• Press the button MENU so many times until the display shows
[ADDRESS]
, and press the button ENTER
to confirm.
• Press UP/DOWN button to select the desired value (
001-512
).
• After the setting value is automatically saved.
• Press the MENU button to go back or wait some seconds for automatic exit from the menu.
To able to operate the CROMOSPOT400 with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the CROMOSPOT400. The other functions of the light effect panel
are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
14
33
33-46
47
61
75
11
33
33-43
44
55
66
Summary of Contents for CROMOSPOT400
Page 1: ...EN IT Manuale Utente User Manual CROMOSPOT400 MOVING HEAD...
Page 29: ......
Page 59: ......
