CROMOBEAM260
18
3.14 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Settings functions
1. Press the button MENU so many times until the display shows
[INVERT]
, then press the button ENTER.
2. Press the button UP/DOWN to select
[PAN]
,
[TILT]
or
[COLOR]
, press ENTER button to confirm the choice.
3. Set the desired parameter using the UP/DOWN button and press the ENTER button to confirm the
setting.
-
[PAN]
- Reverse PAN movement. Select (
NORM/ REVERSE
) for normal/inverted control of the PAN
function.
-
[TILT]
- Reverse TILT movement. Select (
NORM/ REVERSE
) for normal/inverted control of the TILT
function.
-
[COLOR]
- Color movement mode. Select (
STEP - LINEAR
) mode.
4. Enter
[USE]
and set
[YES]
to run the new setting.
Range function
1. Press the button MENU so many times until the display shows
[RANGE]
, then press the button ENTER.
2. Press the button UP/DOWN to select
[P/START], [P/FINISH], [T/START]
or
[T/FINISH]
, press ENTER button to
confirm the choice.
-
[P/START]
- Starting point for the limited Pan. Press UP/DOWN button to select the desired value
(
000-255
).
-
[P/FINISH]
- Finishing point for the limited Pan. Press UP/DOWN button to select the desired value
(
000-255
).
-
[T/START]
- Starting point for the limited Tilt. Press UP/DOWN button to select the desired value
(
000-255
).
-
[T7FINISH]
- Finishing point for the limited Tilt. Press UP/DOWN button to select the desired value
(
000-255
).
3. Enter
[USE]
and set
[YES]
to run the new setting.
Special function
1. Press the button MENU so many times until the display shows
[SPECIAL]
, then press the button ENTER.
2. Press the button UP/DOWN to select
[BLACKDELAY]
or
[RESET]
, press ENTER button to confirm the
choice.
3. Set the desired parameter value and press the ENTER button to confirm the setting.
-
[BLACKDELAY]
- Move in black. Press UP/DOWN button to choose
[NO]
without delay or
[YES]
3
seconds.
-
[RESET]
- Reset control. Press UP/DOWN button to choose
[DMX]
DMX control reset or
[SYSTEM]
DMX
cannot control reset.
4. Enter
[USE]
and set
[YES]
to run the new setting.
Reset function
1. Press the button MENU so many times until the display shows
[INTRO]
, then press the button ENTER.
2. Select in submenu
[RESET]
, press ENTER button to confirm the choice.
3. Select
[YES]
in order to reset the default values.
