ProLights Astra Wash37Pix, User Manual

Page: 17 / 40

PROLIGHTS - Astra
Wash37Pix 15
10 - MENU STRUCTURE
The following chart describes the MENU tree of the product, the terms shown in
BOLD
indicates the
default settings.
MENU
1 CONNECT ADDRESS
FIXTURE DMX / WDMX
001
-512 Set address used for Fixture
and for Pixel patch.
sACN
ARTNET
PIXELS FOLLOW FIXTURE
001
-512
DMX / WDMX
sACN
ARTNET
sACN + KLINGNET
KLINGNET
DMX MODE
FIXTURE BASIC
FX
STANDARD
EXTENDED
Set DMX chart for Main Fixture.
PIXELS
OFF
RING
PIXELS
Set DMX chart for Pixel Fixture.
WIRELESS
WDMX ON/OFF ON/
OFF
Enable/Disable the wireless card.
WDMX MODE TRANSMITTER/
RECEIVER
Allows to choose whether to set the wire-
less on the Transmitter or Receiver.
WDMX mode is unlocked only if WDMX
ON / OFF is ON.
TX LINK ON/
OFF
TX link unlock when the unit is set as a
transmitter.
TX UNLINK ON/
OFF
Disconnect the transmitter from all receivers.
TX unlink unlocks only if WDMX mode is
on transmitter.
RX RESET ON/
OFF
Total reset of the receiver.
RX reset unlocks only if WDMX mode is
receiver.
IN TO WDMX (TX) OFF
MAIN FIXTURE TO
WDMX
PIXEL ENGINE TO
WDMX
Enable/Disable the transmission of the
DMX values via wdmx.
Main Fixture to WDMX: transmitt main
fixture DMX values.
Pixel Engine to WDMX: transmitt pixel
engine dmx values.
WDMX TO DMX (RX)
ON
/OFF Enable/Disable the retransmission of the
DMX from the receiver to the other units
connected by cable to the receiver itself.
ETHERNET
SETTING
ARTNET SETTINGS IP ADDRESS
NET
SUBNET
UNIVERSE
Set IP address of the fixture.
Set Net for ArtNet protocol.
Set Subnet for ArtNet protocol.
Set Universe for ArtNet protocol.
sACN SETTINGS IP ADDRESS
UNIVERSE
Set IP address of the fixture.
Set Universe for sACN protocol.
MERGE
MODE
OFF
/HTP/
LTP
Set Merge Mode for sACN protocol.
ETHERNET TO DMX
ON
OFF
Enable / Disable DMX retrasmission from
sACN/ArtNet signal to DMX out port.
KLINGNET
ON
OFF
Enable / Disable Klingnet functionality for
sACN / ArtNet protocols.