ProLights ARENACOB4HALO, User Manual

Page: 27 / 44

7
ARENACOB4HALO
- 2 - INSTALLATION
2.1 MOUNTING
ARENACOB4HALO may be set up on a solid and even surface. More units can also be mounted together
with the included hardware (max 10 pcs for each column). For fixing, stable mounting clips are required.
The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s
weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the fixture’s being used.
• Install the projector at a suitable location by means of the mounting bracket (2).
• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
• Adjust the projector and use the screw to slightly release or tighten the locking mechanism of the
bracket if is necessary (1).
Fig.3
1
2
MAX 10 pcs
CLAMP
SAFETY
ROPE
ARENACOB4HALO