PROLIGHTS - ArcShine
M series
14
8 - OPERATION VIA DATAMASTER
The unit uses a DATAMASTER for configuration purposes. The diagram below sows how to connect the
DATAMASTER to this product. This connection will control multiple products at the same time.
To set different Stand Alone mode on different product, you must connect the DATAMASTER to each
product, individually.
However, by using the DATAMASTER, you may address each product in the daisy chain to a different
DMX address by using the RDM function without the need connect to each individual product.
Important: The DATAMASTER must be used to configure this product.
MUSIC & LIGHTS suggests that you connect no more than 11 units in this mode and keep the total
distance to less than 60 m (197 ft). Otherwise, you might need to use an RDM optically isolated signal
amplifier.
RDM SETTING
To set the RDM functions with the DATAMASTER follow these steps:
•
Turn on the DATAMASTER;
•
Select the "RDM" function;
• Wait the discovering of all units;
• Select the desired unit and press ENTER button;
• Change the value of the desired function.
The following chart describes the RDM menu tree of the product, the terms shown in BOLD indicates
the default settings.
STAND ALONE FUNCTION
•
To set Standalone Mode please refer to the Menu Structure
DATAMASTER
Fig. 08
Summary of Contents for ArcShine M9-18VW
Page 31: ......
