17
ARCLED7314TRITZ
3.15 STATIC configuration
To set the custom balance of red, blue and green:
•
Press the button MENU so many times until shows [
STAT
], and press the button ENTER to confirm.
•
Select the color red, green or blue (
Red - Green -Blue
) through the buttons UP and DOWN and then press
the button ENTER.
•
Set the value (
000 - 255
), through the buttons UP and DOWN.
•
Set the value of the [
Strob
] tra (
0 - 20
) through the buttons UP and DOWN.
3.16 Editing custom programs
To edit the custom programs:
•
Press the button MENU so many times until show [
EDIT
] and press the button ENTER to confirm.
•
Select the program
PR.01 - PR.10
.
•
Each custom program has 30 steps that can be edited.
•
Each step allows the creation of a scene using red (
Red
), green (
Green
), blue (
Blue
), (
Strobe
), (
Time
) and (
Fade
).
•
Set the value (
000 - 255
), through the buttons UP and DOWN.
3.17 Special functions
•
Press the button menu and select through the directional buttons the [
SET
] mode; and press the button
ENTER to confirm.
It is possible to view to following functions:
UPLD
•
Select [
UPLD
] to upload the custom programs from the current Master unit to the Slave units.
•
In order to activate the upload function the password must be entered. Password is the same as the main
access password.
•
When uploading the Master and Slave units will display yellow.
•
If an error occurs when uploading the Master and/or Slave units will display red.
•
On successful uploading of the custom programs the Master and Slave units will display green.
REST
•
In order to reset custom modesto default values select [
REST
].
ID
•
Enter [
ID
] in order to allow/disallow ID address function from the DMX controller.
COLOR
•
[
COLOR
] is for activate/deactivate the color calibration functions.
- When [
RGBW
] is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2 (
RGBW
).
- When [
COLOR
] is set [
OFF
], on RGB =255, 255, 255 the RGB values are not adjusted and the output is
most powerful.
- When [
UC
] is selected, the RGB output adjusted to a standard preset universal color which balances
fixtures from different generations
•
Enter [
Dim
] to select dimmer mode and dimmer speed. When dimmer is set to [
OFF
], the RGBW and MAS-
TER DIMMER are linear. The Dim1/2/3/4 are speed modes of the non linear dimmer, [Dim1 ] is the faster,
while [Dim4 ] is the slowest.
Note. The factory default setting is [
Dim4
].
Summary of Contents for ARCLED7314TRITZ
