19
ARCLED7307HD
WHITE BALANCE
Enter the [
CAL2
] mode to adjust the RGB parameter to make different whites.
•
Press the button MENU so many times until show [
CAL2
] and press the button ENTER to confirm.
•
Select red, green or blue (RED - GREEN -BLUE), through the button UP/DOWN. Press the button
ENTER to confirm.
•
Set the value 000 - 255, through the button UP/DOWN.
•
When the new setting is activated, the DMX controller choose RGB=255, 255, 255 the write color will
be made by actual RGB values on the [
CAL2
].
3.17 ACTIVATE THE PASSWORD
Enter the KEY mode to select whether the access password is on or off.
•
Press the button MENU so many times until show
[KEY]
and press the button ENTER to confirm.
•
Select
[ON]
or
[OFF]
.
When the fixture is set as pass
[ON]
, after 30 seconds or turn on the fixture next time, the fixture will need
an access password to enter the display menu control.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
Summary of Contents for ARCLED3109PIX
