ProLights ARCLED3109PIX, User Manual

Page: 33 / 52

9
ARCLED7307HD
3.3 MENU STRUCTURE
3.4 OPERATION IN AUTOMATIC MODE
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows [ AUTO ], then press the button ENTER.
• Press the button UP/DOWN to switch between the programs ( AUTO 01 - AUTO10 o CUSTOM01 - CUSTOM10 ). The
unit will operate in automatic mode.
NOTE - Programs AUTO 01 - AUTO10 are fully pre-programmed and will not be altered by changes in EDIT
mode. Programs CUSTOM01 - CUSTOM10 are fully pre-programmed and can be edited in EDIT mode.
In automatic mode the unit will be set as Master.
STAT
RED R.(000-255)
GREN G.(000-255)
BLUE
b.(000-255)
STRB S.(0-20)
AUTO
AT.01 ÷ AT.10
PR.01 ÷ PR.10
RUN dMX / SLAVE
dMX d.(001-512)
PERS TOUR / TR16 / ARC.1 / AR1.d / AR1.S / HSV
EDIT PR.01 ÷ PR.10
SC.01
RED, GREN,
BLUE, STRB,
TIME, FADE
R.(000-255), G.(000-255),
b.(000-255), S.(0-20), T.(000-255),
F.(000-255)
...
SC.30
SET
UPLd **** SEND OK
REST **** REST OK
COLO OFF/ RGBw / UC
dIMX
DIM4 / DIM1 / DIM2 / DIM3 / OFF
CURV OFF / CV1 / CV2 / CV3
DERR SAVE/ BLAK
SLCK
OFF/ON
STRB SPEC/CLAS
CAL
(Password:
UP-DOWN
UP-DOWN)
****
CAL1 wT.01 ÷ wT.11
R.(000-255)
G.(000-255)
b.(000-255)
CAL2 RGBw
R.(000-255)
G.(000-255)
b.(000-255)
CALR **** OK
KEY ON/OFF