ProLights ARCLED2033, User Manual

Page: 21 / 28

9
ARCLED2033
CHANNEL FUNCTION DMX VALUE PRIORITY
0 1~255
1 Master Dimmer Dimmer 0~100% 2
2 Red Dimmer 0~100% 5
3 Green Dimmer 0~100% 5
4 Blue Dimmer 0~100% 5
5 Rainbow Effect Off Mixed color control on preset turn 4
6 Rotating Rainbow Effect Off Mixed color in cycle with speed adjustable from slow to fast 3
7 Strobe Off Strobe speed adjustable from slow to fast 2
8 Pulse Strobe 50% Strobe VS Dark, duty cycle 90%~10% 2
9 Build-in Programs Off Refer to fig.5 1
10 ID Addressing Off ID Address: 0(0-3), 1(4-7)... 62(248-251), 63(252-255) 1
11 White Balance Off White Balance 2
3.8 DMX control (11 channels operation)
3.7 Adjusting the start address and the number of DMX channels
For operating the ARCLED2033 with a light controller, adjust the DMX start address for the first DMX chan-
nel. If e. g. on the controller the address 17, is provided for controlling the unit, adjust the start address 17
on the ARCLE2033. Then the other functions of the unit are automatically assigned to the following 10 chan-
nels (in this example 18 to 27). As the next possible start address for the following DMX-controlled unit, the
address 28 could be used for this example. By using FUNCTION and buttons it is possible to set
up the start address. Once the unit receives a signal for the control unit, the display will show the current
start address value. Moreover, for same start address, further 64 Sub-ID address are available.
• If the DMX value of the 10 channel is between 001 and 003, the units will be controlled by DMX in normal
way and will be not influenced by Sub-ID address setting.
• If the DMX value of the 10 channel is between 004 and 255, the units will be controlled by DMX and will
respond accordingly with the Sub-ID address setting.
The Sub-ID address value is obtained by dividing the DMX value /4.
Example 1.
If the DMX value = 13 than the corrensponding Sub-ID value will be 13/4 = 3.25, so the value will be 3.
Example 2.
N.1 ARCLED2033: start address =5 - Sub-ID=1
N.2 ARCLED2033: start address =5 - Sub-ID=2
DMX Channel 10: for values between 001 and 003 both of two units will be controlled.
DMX Channel 10: for values between 004 and 007 only the ARCLED345 N.1 will be controlled.
DMX Channel 10: for values between 008 and 011 only the ARCLED345 N.2 will be controlled.