AIR5FAN
18
Select Chase
The function
Select Chase
lets you choose the automatic program to actually run.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Stand Alone
icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Select Chase
and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select
Chase Part 1/Chase Part 2/Chase Part 3
and press ENTER to confirm.
• Press the UP/DOWN button to select
Chase1-Chase8
, and press the ENTER button to confirm.
• Press the LEFT button repeatedly to exit the menu and save changes.
Edit Chases
The function
Edit Chases
allows you to create automatic pre-programmed show.
The automatic programs
Chase Part1/2/3
are each divided into
Chase1-Chase8
. Each Chase can be composed
of
1-64 step
that can be configured through the following procedure:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Stand Alone
icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Edit Chases
and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Edit Chase 1 - Edit Chase 8
, then press the
ENTER button to confirm.
• Press the UP/DOWN button to select the
Step 01 - Step 64
, and press ENTER to confirm.
• Press the UP/DOWN button to select the
Scene
you want to set for the Step chosen, and then press
ENTER to confirm.
• Press the LEFT button repeatedly to exit the menu and save changes.
Edit Scenes
The function
Edit Scenes
allows you to create individual scenes to be included in the Chase Step.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Stand Alone
icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Edit Scenes
and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Edit Scene 001 - Edit Scene 250
, then press the
ENTER button to confirm.
• Press the UP/DOWN button to select the desired function you want to edit (Control, Tilt, etc..), Then
press the ENTER button to confirm.
• Press the UP/DOWN button to change the value of the function, then press the ENTER button to
confirm.
• Press the LEFT button repeatedly to exit the menu and save changes.
3.16 SLAVE RECEIVE MODE
This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave with the same effect.
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3 differ-
ent Slave units, which run 3 different programs. The Master unit sends the 3 program parts in a continuous
loop.