ProLights 1000A, User Manual

Page: 18 / 28

FLOODLIGHT series
6
- 2 - INSTALLATION
2.1 Lamp
We recommend using:
• 1000W 230V, R7s-187 base (cod. 800726); 500W 230V, attacco R7s-117 (cod. 800710).
• 1000W 230V, R7s-187 base (cod. 800726PL); 500W 230V, attacco R7s-117 (cod. 800710PL).
Make sure that the used lamp is compatible with local voltage. If the lamp is operated with a voltage sur-
passing its nominal operating voltage, it can be damaged or its service life reduced considerably.
2.2 Inserting or replacing the lamp
Please proceed as follows to replace the lamp (the lamp gets very hot during operation, so let it cool down
sufficiently before you attempt to dismount it! Lamps that have been damaged must be replaced immedi-
ately).
1. Disconnect the power plug the unit, open the cover (fig.2) and unscrew the screw (5).
2. Open the prospective grill and insert the lamp into the lampholder (fig.3).
3. Do not touch the lamp’s envelope with bare hands. Should this happen, clean the bulb with a cloth
soaked in alcohol and dry it with a clean, dry cloth. Insert a new lamp into the lampholder.
4. Replace the prospective grill and close the access hatch.
Fig.2
Fig.3
5