2. Features & Technical Specifications
Control:
Sound active, Auto, Master/slave and DMX-512 modes
DMX Channels: 1CH/8CH/10CH
Gobos/colours: 7 Gobos / open/white
Electronic dimming:
0-100%
3.
How To Set The Unit
3.1 Control panel & Display
Display
Shows the various menus and selected functions
Button
Mains input
Connection to the power supply.
DMX input/output
For DMX 512 linking. Use a 3-pin XLR cable to link to the controller or to
other units.
3.2 Main Functions
To select any of the given functions, press the
MENU
button up to
where the required function is showing on the display. Select the
function by
pressing the
ENTER
button and the display will blink. Use
the
DOWN
and
UP
buttons to change the mode. Once the required
mode has been selected, press the
ENTER
button to confirm. To go
back to the functions without any changes, press the
MENU
button
again. Press and hold the
MENU
button for one second or wait for one
minute to go back to the main menu.
The main functions are as below:
Menu
ADDR
001-512
CHND
1CH/8CH/10CH
SLND
MAST
SL1
SL2
SPEED
SLOW
NORL
MENU
Selects the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
Confirms the selected functions
Voltage:
100V~240V, 50/60Hz
Fuse:
T2.5A
Power consumption:
61W
Light source:
1 x 30W white LED
Dimension:
310 x 140 x 175mm
Weight:
2.8 kg
Pan/Tilt:
166°/54°
Power sockets:
IEC POWER INPUT/OUTPUT
XLR sockets:
3-pin XLR INPUT/OUTPUT
Summary of Contents for EQLED052
Page 9: ...www prolight co uk...
