2A
1. Safety Introductions
WARNING
l
Please keep this User Manual for future consultation. If you sell the fixture to another
user, be sure that they also receive this instruction booklet.
l
Unpack and check carefully there is no transportation damage before using the fixture.
l
Before operating, ensure that the voltage and frequency of power supply match the
power requirements of the fixture.
l
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
l
Disconnect main power before servicing and maintenance.
l
Use safety chain when fixes this fixture. Don’t handle the fixture by taking its head only,
but always by taking its base.
l
Maximum ambient temperature is Ta : 40
℃
. Don’t operate it where the temperature is
higher than this.
l
In the event of serious operating problem, stop using the fixture immediately. Never try
to repair the fixture by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center. Always use the same type spare parts.
l
Do not connect the device to any dimmer pack.
l
Do not touch any wire during operation and there might be a hazard of electric shock.
l
To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain
or moisture.
l
The housing must be replaced if they are visibly damaged.
l
Do not look directly at the LED light beam while the fixture is on.
Warning
l
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
l
Do not open the unit within five minutes after switching off.
l
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.
3A
damaged.
Caution
There are no user serviceable parts inside the fixture. Do not open the housing or attempt
any repairs yourself. In the unlikely situation, your unit may require service, please contact
your nearest dealer.
2. Technical Specifications
¥
LED
: total 24 x 1W LEDs: Red 8pcs, Green 8pcs, Blue 8pcs
¥
Power supply
Input Voltage: AC 100V-240V 50-60Hz
Power consumption: 67W
¥
Fuse:
T 3.15A
¥
Dimension:
290 x 268 x 362mm
¥
Weight:
2.8KG
3. Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit
is firmly fixed to avoid vibration and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and is able to support a weight of 10
times of the unit’s weight. Also always use a safety cable that can hold 12 times of the
weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out
of the touch of people and has no one pass by or under it.
4. How To Set The Unit
4.1 Main Function
To select any of the given functions, press the
MENU
button up to the required one is
showing on the display. Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the mode. Once the required mode has been selected,
