Detaching the Propeller
Remove the propellers with care as the blades are sharp and might cause injury. Just
rotate the propellers to detach them and do not use screw drivers to unmount them as the
screws are there to hold the mount and not the propeller. Make sure the vehicle is in off state or
in no position to fly. If a propeller is broken, replace it with the same model or if not possible
might need to change the entire propellers. Make sure all propellers are in good condition and
screwed properly before each flightMaintain distance from the propellers before flight or when
the propellers are spinning.
Battery Management System (BMS)
We have a highly intelligent dual battery power system - a Li-ion based primary source
and Li-po based secondary source. The charging and discharging of the battery source is
designated by the BMS. If one of the power systems fails the system is not completely
dysfunctional but will enter into the failsafe mode and land in the nearest safe location avoiding
imminent crash scenario. The BMS is a robust system that has several protection facility:
1. Overcharge protection
2. Over Discharge protection
3. Parallel cell balancing
The battery charge state can be viewed on the battery unit itself as well as the data is also
displayed in the DMS app.
© 2020 Prokura Innovations. All Rights Reserved.