4
20M
Ω
±(1.0%+25)
10k
Ω
Open voltage: less than 3V.
Overload protection: 250V DC or AC peak value.
NOTE:
1.
At 200
Ω range, the test leads should be short-circuited,
and measure the lead to lead resistance, then, subtract from the
real measurement.
2.
It is normal for reading to be slow when measured value
is above 1M
Ω, please read it after the display value stabilizes.
2.2.6 CAPACITANCE (C)
RANGE
ACCURACY
RESOLUTION
20nF
±(3.5%+20)
10pF
200nF
100pF
2uF
1nF
20uF
±(5.0%+10)
10nF
200uF
100nF
2000uF
1uF
Overload protection: 250V DC or AC peak value
NOTE: when over range, it can keep on measuring, "OL" will not
show on LCD and the value is for reference only
2.2.7 FREQUENCY
RANGE
ACCURACY
RESOLUTION
10Hz
±(1.0%+10)
0.001Hz
100Hz
0.01Hz
1kHz
0.1Hz
10kHz
1Hz
100kHz
10Hz
2MHz
100Hz
Input sensivity:1V RMS , overload protection : 250V DC or AC
peak value(less than 15 seconds)
NOTE: when over range, it can keep on measuring, "OL" will not
show on LCD and the value is for reference only
2.2.8 DIODE AND CONTINUITY TEST
